EasyManua.ls Logo

Saeco HD8769 Moltio - Troubleshooting

Saeco HD8769 Moltio
100 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
90
ENGLISH
TROUBLESHOOTING
This chapter summarizes the most common problems you could encoun-
ter with your machine. If you are unable to solve the problem with the
information below, visit www.saeco.com/support for a list of frequently
asked questions or contact the Philips Saeco hotline in your country. Con-
tact details can be found in the warranty booklet packed separately or at
www.saeco.com/support.
Machine actions Causes Solutions
Error Code 1
Co ee grinder blocked.
Co ee outlet duct clogged. Thoroughly clean the co ee
outlet duct as described in the
Weekly Cleaning of the Brew
Group chapter.
Error Code 3-4
Brew group blocked, cannot be
pulled out.
The brew group is out of place. Close the service door. Turn
o and back on the machine.
The brew group automatically
returns to the initial position.
Error Code 5
Water circuit error.
Air in the water circuit. Remove and put back the water
tank a few times, making sure
it is properly reinserted. Check
that the water tank compart-
ment is clean.
If the Intenza+  lter is installed,
remove it.
Turn o the machine and put it
back on.
Thereafter place the  lter back.

Table of Contents

Related product manuals