Need help?Do you have a question about the SAF FreeMile and is the answer not in the manual?
General| Brand | SAF |
|---|---|
| Model | FreeMile |
| Category | Transceiver |
| Language | English |
Introduces the SAF FreeMile product line for data transmission over microwave radio.
Covers main features, mechanical specifications, and interfaces/management details.
Details on modem/transceiver development, system gain, RSL, and ACM capabilities.
Illustrates use cases like 2E1+Ethernet, repeaters, and mesh networks.
Comprehensive technical details including frequency, modulation, ports, and management.
Specifies requirements for Cat.5e UTP cable for connectivity and power.
Information on the product label on the SAF FreeMile FODU for identification.
Procedures for resetting the SAF FreeMile FODU to factory defaults via various methods.
Covers 10/100Base-T port, connector assembly, Ethernet connection, and PoE injection.
Describes the Web interface layout and how commands are executed within it.
Step-by-step guide for initial setup and configuration using the Web GUI wizard.
Information on using the command line interface for configuration and monitoring.
Explains the functionality and operational modes of the RSSI LED indicator.
Overview of the main page in the Web GUI, showing system parameters and status.
Checking spectrum for interference and selecting optimal channels for use.
Summary of system inventory and troubleshooting information, including file downloads.
Displays current alarms, including group, date, time, and alarm name.
Configuration of primary system parameters, including radio and modem settings.
Setting up loopback tests for E1, modem, and RF interfaces for diagnostics.
Configuring user accounts, names, software upgrades, and service information.
Configuring Ethernet management port IP settings, services, and static routes.
Configuring Ethernet ports, status, and VLAN settings for network segmentation.
Configuring QoS 802.1p and DSCP for traffic prioritization.
Configuring Spanning Tree Protocol parameters for network loop prevention.
Configuring SNMP community names and allowed hosts for network monitoring.
Covers alarm structure, logs, configuration, and management commands.
How to view alarm history, navigate entries, and understand alarm IDs.
Configuring alarm representation and setting threshold levels for alarms.
Using command line for managing alarms, including logging and filtering.
Data collection, performance values (TS, TM), and Web GUI review.
Visual representation of signal modulation schemes and interference types.
How the adaptive equalizer filter compensates for channel variations and fading.
Commands for viewing performance logs, selecting parameters, and clearing logs.
Detailed statistics for Ethernet modem, including frame counts, errors, and QoS.
Statistics for Ethernet switch ports (LAN, WAN, MNG) showing packet counts and errors.
Managing configuration scripts, saving, loading, and editing files.
How to execute commands via the command line interface for device management.
Information about firmware, boot configuration files, and file system operations.
General security tips, default credentials, and password management.
Steps to discover IP address and firmware version of SAF FreeMile units.
Examples of using 'dp sight', 'dp scan', and 'dp remote' commands for discovery.
Steps to update software using TFTP batch files and commands.
Procedure for uploading firmware files via Ethernet using TFTP.
Procedure for uploading firmware files via Ethernet using FTP.
Pinouts for 2xE1 and Ethernet RJ-45 connectors for data transfer and power supply.
To Next Page