Safe Aurora - Adjusting the Support Leg

10
Rotate the Isofix system control dial to the Clockwise direcon unl
the seat close as possible to the back rest of the vehicle’s seat, make
sure the gap has eliminated.
Adjusng the Support Leg.
Push the release buons on both
side to the center direcon, and
extending the support leg to the
surface of floor unl it fully reaches,
make sure you see the safety display
shows GREEN on both side.
CAUTION!
• The seat must be secured with the Isofix system even if there is no
child is travelling.
• Both Isofix connectors must be anchored securely and safety
displays are all show GREEN.
• The seat shell are fully locked on the Isofix base and
safety displays are all show GREEN.
• The support leg must fully reaches
surface of floor and the safety displays
are all show GREEN.