Safe Aurora - Removing;Attaching the Cover

17
REMOVING/ATTACHING THE COVER
To remove the cover, the seat shell (A) has to be removed from the
base (B) first. (SEE “Remove the seat”)
1. Loose the harness system by adjusng the central device.
2. Unlock the harness buckle, then take off the Pelvic Insert for new
born to 13kg.
3. First remove the cover from the headrest.
4. Use a pencil-like tool to push the elasc bands buons from top to
downwards direcon, and take off the bands which aached to two
buons on both side on the seat shell.
5. Thread the main buckle body through the buckle pad and out
underneath the cover
6. Loose the elasc bands which are located in the placed marked red
on the reverse side of the cover, and pull the seat off in forward
direcon to take off the main cover.
Check that all the locks are closed and all anchoring are correctly
fastened.
1
2
3
4
4
5
6