PAGE 2
SAFETY FIRST !
LETHAL VOLTAGES MAY BE PRESENT!
PLEASE READ THIS INSTRUCTION MANUAL THOROUGHLY BEFORE
ATTEMPTING ANY INSTALLATION, OPERATION, MAINTENANCE OR INSPEC-
TION. FAILURE TO FOLLOW THE RECOMMENDED PROCEDURES OR
CAUTIONS IN THIS MANUAL COULD RESULT IN INJURY TO PERSONNEL AND/
OR DAMAGE TO EQUIPMENT.
CAUTION !
1. CHECK THE NAME WRITTEN ON THE PRODUCTS AND INSURE THAT
THE PROPER PART HAS BEEN RECEIVED.
2. THOROUGHLY INSPECT THE PART(S) FOR ANY DAMAGE DUE TO SHIP-
MENT OR HANDLING.
3. THE PART(S) MAY CONTAIN CMOS CHIPS AND CAN BE DAMAGED BY
STATIC ELECTRICITY. HANDLING SHOULD BE IN ACCORDANCE WITH
INDUSTRY STANDARDS.
4. BEFORE INSTALLING THE PART(S) TURN OFF ALL POWER TO THE
EQUIPMENT AND INSURE THE CHANGE INDICATOR LAMP ON THE IN-
VERTER IS
OFF
.
LETHAL VOLTAGES ARE PRESENT !
5. DO NOT CONNECT OR DISCONNECT WIRING WHILE POWER IS
ON !
6. FOLLOW GOOD STANDARD WIRING PRACTICES AND ANY APPLICABLE
CODES THAT MAY APPLY.
PAGE 7
To Next Page
Loading...
Need help?
General