Need help?Do you have a question about the Saga Elite Series and is the answer not in the manual?
Details key speaker components like Woofer, Tweeter, Crossover, Frequency Response, Impedance, Power Handling, and Efficiency.
Provides critical measurements for installation: Overall Diameter, Cutout Diameter, and Cutout Depth.
Determine speaker placement and trace using the included cut-out template.
Use a drywall saw or hole saw to cut the required hole for the speaker.
Attach the speaker wire to the correct positive (+) and negative (-) terminals.
Push the speaker into the prepared opening and make any necessary final adjustments.
Using a Phillips screwdriver, tighten the mounting tabs until the speaker is secured in place.
Finish the speaker installation by placing the magnetic grille onto the speaker.
Explains the LIMITED LIFETIME WARRANTY on parts and labor, including repair or replacement terms.
Provides contact information for technical assistance, including phone, email, and website.
General| Speaker Type | Bookshelf |
|---|---|
| Configuration | 2-way |
| Power Output | 100W RMS |
| Impedance | 8 Ohms |
| Sensitivity | 88dB |
| Driver Size | 6.5" Woofer, 1" Tweeter |
| Enclosure Type | Bass Reflex |
| Color | Black |
| Dimensions | 8 x 10 inches |
| Weight | 15 lbs |
To Next Page