Need help?Do you have a question about the Sage Boss To Go SPB620 and is the answer not in the manual?
Key safety instructions and precautions to read before using the appliance.
Never blend hot/warm ingredients; stop if contents become hot due to blending.
Do not blend continuously for more than 1 minute to prevent overheating.
Allow a pressurised tumbler to cool before unscrewing the blade assembly.
Do not blend carbonated liquids or ingredients that generate gas.
Never fill the tumbler beyond its indicated maximum capacity.
Stop, unplug, check for damage, clean, and reassemble if leakage occurs.
Never leave the appliance unattended while it is operating.
Handle and clean blades with extreme care as they are very sharp.
Avoid placing the cup on the motor base while the motor is still spinning.
Never operate the blender without ingredients in the cup or jug.
Do not operate with damaged blades or foreign objects inside the cup.
Blades must be firmly secured to cup before operation.
Never operate or place blade assembly on base without the cup in place.
Do not fill past the MAX level marking to prevent motor strain and leakage.
Exercise caution when handling blades as they are extremely sharp.
Instructions for assembling cup, blade, and motor base correctly.
Details on the motor's internal overload protector and reset procedure.
Avoid hot water or detergent when rinsing to prevent dangerous pressurisation.
Check power plug insertion and ensure Overload Protection System has not tripped.
Likely overload protection; unplug, remove cup, and cool motor for 30 minutes.
General| Power | 1000W |
|---|---|
| Material | Plastic |
| Blade Material | Stainless Steel |
| Voltage | 220-240V |
| Settings | Pulse |
| Frequency | 50-60Hz |
To Next Page
