EasyManua.ls Logo

Sage SWM620 - OPERATING YOUR NEW APPLIANCE; A BIT MORE Feature

Sage SWM620
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
OPERATING YOUR NEW APPLIANCE
Beforerstuse,removeandsafelydiscardany
packing material, promotional labels and tape
fromthewaemaker.
1. Wipethewaemakercookingplateswith
a damp sponge or cloth. Dry thoroughly.
2. Placethewaemakeronaat,drysurface.
Ensure there is a minimum distance of 10cm
ofspaceonallsidesofthewaemaker.
Ensure there are no items on top of the
waemaker.
3. Unwind the power cord completely and insert
the power plug into a grounded 220–240V
power outlet.
4. Turn the POWER/MENU dial clockwise until
thedialindicatorreachesthedesiredwae
type or choose the CUSTOM setting.
HEATING will be displayed on the LCD.
NOTE
Whenthewalemakeristurnedon
forthersttime,itmayemitvapors.
It is safe and not detrimental to the
performance of the appliance.
5. There are 12 browning settings ranging
from ‘1’ (lightest) to ‘12’ (darkest). The default
browning setting is ‘6.’ Use the Light-Dark
browning control dial to adjust the brownness
ofyourwae.Rotateclockwisetoincrease
brownness, or rotate counterclockwise to reduce
thebrownnessforalightercolouredwae.
6. Oncethewaemakerhascompletedthe
preheating cycle, two audible alerts will sound
and the LCD screen will turn orange. Lift the
top plate lid completely into the open position.
When the lid is in the open position, the LCD
will turn blue and close lid to start will appear.
Pourinthebatterevenlyintothewaeplates.
Thebattershouldcoverthepeaksofthewae
plate(approximatelyhalfthewaedosingcup
foreachwae).
7. Close the lid once the batter has been
poured in. Once the lid is closed, the timer will
automatically begin to count down. The LCD
changes to orange to indicate that the cooking
cyclehascommenced.Thewaemakerwill
automatically calculate the correct cooking
time depending on a number of variables.
NOTE
The storage clip should be in it's open
positionwhenthewalemakeriscooking.
8. Three audible alerts will sound at the end
of the cooking cycle, the timer will disappear
and “End” will be shown on the screen.
Openthewaemakerlidandcarefullyremove
yourwaes.Ifyouwillnolongerbecooking
anymorewaes,turntheSelectorDialtothe
OFF position.
NOTE
Do not use metal utensils when removing
thewaesfromthewaemakerasthey
may scratch the non-stick surface.
NOTE
Ifwaesarenotremovedimmediately
after the cooking cycle has completed,
an audible alert will sound every
30 seconds.
9. Ifyouarecookingadditionalwaes,simply
addmorebattertothelowerwaeplateand
follow steps 7 & 8 above. If necessary to reset
the time cycle, press the RESTART button.
A BIT MORE
Allows you to conveniently and quickly add time
to a cooking cycle. A BIT MORE
can be used
both during the cooking cycle or immediately
afterthecookingcyclehasnished.Inboth
instances, it will add a small amount of time
proportional to the overall cooking time for
thatbatchofwaes.
EN

Related product manuals