Installation and User Guide - N56717020101
Page A0-4
Reproduction and communication in any form prohibited without the written permission of
(
Figure 2-1 Synchronization from the 2 MHz external sync input (T3) A2-10
Figure 2-2 Synchronization from the 2 MHz port A2-10
Figure 2-3 Remote loopback function (registering alarms on central site) A2-11
Tables 2-1 to 2-6 Configuration parameters A2-2 to A2-7
Tables 2-7 to 2-8 Commands A2-8 to A2-9
Tables 2-9 to 2-10 Alarms and severity A2-13 to A2-14
3. SPARE PARTS....................................................................................................... A3-1 to A3-2
4. SPECIFICATIONS.................................................................................................. A4-1 to A4-2
ANNEX A - CONSTRUCTING AN IP NETWORK ADDRESSING PLAN AA-1 to AA-6
A.1 - Preamble AA-1
A.2 - Addressing IP AA-2
A.3 - Adressing plan AA-3
A.4 - Use of static tables AA-3
A.5 - Use of RIP routing demon AA-5
SECTION B : Guide d'installation et d'utilisation ............ B0-1 à BA-6
To Next Page
Loading...