Need help?Do you have a question about the Sailrite Fabricator and is the answer not in the manual?
General| Max Stitch Length | 6 mm |
|---|---|
| Presser Foot Lift | 13 mm |
| Needle System | 135x17 |
| Motor Type | Servo motor |
| Stitch Type | Lockstitch |
| Motor | 1/10 hp, 800 watt |
| Type | Walking Foot |
| Clearance Under Presser Foot | 13 mm |
Instructions for safely removing the sewing machine casting from its packaging.
Procedure to thoroughly check the machine's condition before initial use.
Adjusts the oil pump setting for optimal flow to the entire machine.
Adjusts oil flow to the rotating hook via a specific screw.
Guide on correctly inserting new needles into the sewing machine.
Step-by-step instructions for winding thread onto a bobbin.
Adjusting tension and fill level for proper bobbin thread winding.
Procedure for safely removing and reinserting the bobbin case.
Instructions on how to correctly thread the bobbin case with thread.
Detailed steps for threading the upper thread through the machine.
Method to bring the bobbin thread up to the needle plate.
Basic steps to begin sewing with the machine.
How to adjust stitch length and use the reverse function.
Modifying presser foot pressure for different fabric types.
Steps to adjust the upper thread tension for optimal stitching.
Guidance on adjusting bobbin thread tension for balanced stitches.
Procedure for safely removing fabric from beneath the presser foot.
Tips for sewing lighter fabrics, including pressure and tension adjustments.
Adjusting the feed dog height relative to the needle plate.
Adjusting the feed dog's forward position relative to the needle plate.
Ensuring correct needle alignment and clearance between presser feet.
Critical steps to ensure proper timing between needle and hook.
Setting the relationship between the inner and outer presser feet.
Adjusting the outer presser foot's vertical travel range.
Ensuring proper synchronization of feed mechanisms.
Adjusting stitch length consistency between forward and reverse sewing.
Adjusting the thread take-up spring tension and travel range.
Diagnosing and fixing common causes of skipped stitches.
Addressing issues with insufficient stitch tension.
Diagram and parts list for the machine arm and bed components.
Diagram and parts list for arm, vertical shafts, and needle bar thread take-up.
Diagram and parts list for feed dog lift and thread looping mechanisms.
Diagram and parts list for the machine's feed mechanism.
Diagram and parts list for the presser foot assembly.
Diagram and parts list for upper feed components.
Diagram and parts list for the machine's oil pump system.
Diagram and parts list for oil reservoir and related accessories.
To Next Page
