What does L1 Voltage High S mean on my SAJ Suntrio-TL?
An L1 Voltage High S error on your SAJ Inverter can occur if the local grid voltage is beyond the permitted range or if there are connection problems between the grid and the inverter. Check the Grid Compliance of the inverter and Grid voltage. If everything appears correct, further assistance is needed.
What causes L1 Freq High S error on SAJ Inverter?
An L1 Freq High S error on your SAJ Inverter means that the local grid frequency is beyond the permitted range or there is a problem with the connection between the grid and the inverter. Check the Grid Compliance of the inverter and Grid Frequency. If everything is correct, further assistance is needed.
What does Lost Com. DC D error mean on my SAJ Suntrio-TL?
If your SAJ Inverter shows a Lost Com. DC D error, check the connection between the Control board and the Display board. If the connection is correct, further assistance is needed.
General| Protection degree | IP65 |
|---|---|
| Output Frequency | 50 Hz / 60 Hz |
| Protection Level | IP65 |
| Model | Suntrio-TL Series |
| MPPT Voltage Range | 200V - 1000V |
| Number of MPPTs | 2 |
| Cooling | Smart Fan Cooling |
| Number of MPP Trackers | 2 |
| Operating Temperature Range | -25 °C ~ +60 °C |
| Storage Temperature Range | -40 °C ~ +70 °C |
| Humidity Range | 0 - 100% |
| Communication | RS485, Wi-Fi, GPRS |
Defines the proper application of the inverter for converting DC to AC and feeding into the electricity grid.
Lists critical safety measures and warnings to prevent electrical shock and hazards during operation and maintenance.
Details the correct procedures and considerations for physically mounting the inverter, including orientation and clearance.
Provides step-by-step instructions for attaching the inverter to the wall using the provided mounting hardware.
Emphasizes critical safety precautions related to electrical discharge and grounding before connecting components.
Recommends specific circuit breaker specifications for safe DC and AC disconnection of the inverter.
Outlines the conditions and requirements for safely connecting the inverter to the public electricity grid.
Describes the procedures and conditions for connecting the solar photovoltaic array to the inverter's DC inputs.
Provides a detailed, step-by-step guide for connecting DC cables using H4 connectors, including stripping and crimping.
Explains how error reports are generated and displayed, guiding users to relevant troubleshooting information.
To Next Page