32
6.2 Startup the Inverter
up after installation, LCD will quickly switch to and stay at the country setting interface. Only
the inverter is set to comply with a certain country, it will work and display normally. Otherwise,
There are 28 countries for choosing
1 Australia 15 Italy
2 Austria 16 Portugal
3 17 China
4 18 Thailand
5 Denmark 19 Default
6 20 Hungary
7 21 Croatia
8 Luxembourg 22 Czech Republic
9 Netherland 23 Germany
10 Norway 24 Israel
11 Poland 25 Greece
12 Sweden 26
13 Switzerland 27 New Zealand
14 28 Spain
Note: if you can’t find the country you want, please directly select ‘Default’.Default mode
is found and grid connection requirement is met, inverter LCD will go to the countdown screen,
as shown in Figure 6.2.
To Next Page
Loading...
