36
6.4.2 LCD Setting Submenu
Setting submenu includes the below setting of the inverter:
Ethernet:
Figure 6.6 is the Ethernet setting screen.Either the IP address is set to be obtained auto or
manually, the IP address displayed on the screen is the current IP address of the inverter. The
focus can be moved by pressing the ‘
’, ‘
Port’ is the inverter embedded Web Server listening port. Inverter embedded Web Server will
monitor two ports, and the default one is port 80.
inverter embedded Web Server can be visited by typing inverter IP address in the web browser.
Another listening port can be changed in the screen. And ‘: web Server port’ is required to be
Figure 6.6, the address to be typed in web
browser should be
, and the Web Server screen is shown in Figure 6.7.
To Next Page
Loading...
