Sako SKI650 Series User Manual

Crucial safety guidelines and precautions before installing the controller.

Safety measures and precautions during the installation process of the controller.

Essential safety precautions to follow during the operation of the controller.

Safety guidelines for maintaining and inspecting the controller.

General safety advice and warranty information for the product.

Guidelines for installing check valves in the pump's drop pipe for system reliability.

Detailed explanation of the SKI650 solar pump inverter's features and functionalities.

Information on how to switch the inverter to a backup AC power source.

Steps for inspecting the SKI650 solar pump controller unit upon receipt.

Overview of the SKI650 solar pump controller's design and capabilities.

Details on the controller's electronic monitoring and automatic shutdown protection features.

Detailed breakdown of SKI650 solar pump inverter models and general parameters.

Visual diagrams and tables for the outline and installation dimensions of the inverter.

Guidelines for mechanical installation, including overheat protection and location selection.

Instructions for electrical installation, including terminal identification and wiring.

Procedures for power DC wiring, including connection to solar array and protection.

Guidance on junction box, ground wiring, and motor wiring connections.

Instructions for optional low water level probe and water tank float switch wiring.

Recommendations for using electrical conduit to protect outdoor wiring.

Description of the keypad layout and display functions of the inverter.

Process for operating the keypad and setting various parameters for the controller.

Steps involved in performing a trial operation of the solar pump system.

Explanation of the parameters displayed on the running status panel.

Comprehensive list of user-configurable parameters and their settings.

A detailed list of fault codes, their descriptions, possible causes, and remedies.

Troubleshooting guide for common faults like pump not running or controller overload.

Procedures for periodic maintenance of the controller and pump.

Guidelines for cleaning and checking solar panels and their wiring.

Regular checks for power and ground wires to ensure reliable connections.