This document is the user manual for the Sakura Mini Air Compressor, model SS3602.
Function Description:
The Sakura Mini Air Compressor is a 12V DC powered device designed for inflating car tyres, bike tyres, sports equipment, air beds, beach toys, and other inflatables. Its primary function is to provide a portable and convenient solution for maintaining correct tyre pressures and inflating various items. The compressor operates by connecting to a vehicle's 12V accessory socket. It features an integrated pressure gauge to monitor inflation progress and ensure items are inflated to the correct pressure. The manual emphasizes the importance of correct tyre pressures for safety, fuel economy, tyre life, and ride comfort.
Important Technical Specifications:
- Model: SS3602
- Power Source: 12V DC only
- Maximum Pressure: 0-100psi
- Inflation Time (reference): 10 minutes from 0-45psi for a 195/65R15 tyre
- Pressure Gauge: Analogue, with readings in PSI, BAR, and KPA
- Air Hose Length: 50cm
- Net Weight: 0.52kg
- Accessories: Includes 3 adaptors for various inflatables
Usage Features:
- Simple Connection: The compressor connects to the tyre air valve using a valve lock lever for secure attachment.
- Automatic Start: Once the 12V plug is connected, the compressor automatically begins to inflate.
- Easy Shut-off: To stop inflation, simply disconnect the 12V plug.
- Versatile Inflation: Suitable for a wide range of items beyond vehicle tyres, including sports equipment and recreational inflatables.
- Portable Design: Its compact size and light weight (0.52kg) make it easy to store and transport.
- Accessory Adaptors: Comes with three adaptors to accommodate different valve types for various inflatables.
- Cold Tyre Pressure Check: The manual strongly recommends checking tyre pressures when tyres are cold (car not driven for a couple of hours) for accurate readings.
- Vehicle Handbook Reference: Users are advised to consult their vehicle handbook or a sticker inside the fuel filler flap/driver's door for correct tyre pressure specifications, noting that pressures are for cold tyres and may need adjustment for heavy loads.
- Regular Pressure Checks: It is recommended to check tyre pressures every couple of weeks.
- Safety Positioning: Users should ensure they are safely positioned away from traffic when inflating a tyre at the roadside.
- Short Run Use: The inflator is intended for short run use, with a maximum running time of 10 minutes, followed by a 10-minute cooling down period before reuse.
- Engine Running Recommendation: It is recommended to have the car engine running during use to prevent battery depletion and ensure full power supply to the unit. The ignition may also need to be in the 'on' position for the 12V accessory socket to function.
Maintenance Features:
- No User Servicing: The product cannot be serviced by the user. In case of electrical or mechanical malfunction, the inflator should be immediately switched off and unplugged.
- Clean 12V Socket: Users are advised to ensure their vehicle's 12V socket is free of debris to prevent overheating of the compressor and power cord, which could cause damage or injury.
- Power Cord Care: Do not abuse the power cord; avoid using it for carrying, pulling, or unplugging the inflator. Keep the cord away from heat, oil, sharp edges, or moving parts to prevent damage and reduce the risk of electric shock.
- Storage: Store the compressor in a safe place when not in use and out of reach of children.
- Professional Tyre Checks: The manual recommends that tyre pressures be checked as part of routine vehicle maintenance with a fully calibrated gauge as used by a car service centre.
- Tyre Inspection: When checking pressures, users should also inspect the tyre tread for wear and look for cuts or bulges on the sidewalls. Deep cuts revealing the internal structure or bulges indicating internal damage require tyre replacement and are an MOT failure.
Safety Warnings and Precautions:
- DO NOT over inflate: Over-inflating items can cause them to burst, potentially resulting in injury.
- DO NOT use for other purposes: The compressor is designed for inflation only; do not use it for any other purpose.
- Disconnect after use: Always disconnect the 12V plug after using the compressor.
- Use only included accessories: Operate the compressor only with the accessories that are included.
- DO NOT use with other source voltage: Do not attempt to operate this compressor with any other source voltage.
- DO NOT rewire or reconfigure: Do not rewire or reconfigure the compressor from its original design, as this may cause personal injury or bodily harm.
- Not a toy: Keep out of reach of children.
- DO NOT leave unattended: Do not leave the inflator unattended when in use.
- Avoid explosive atmospheres: Do not operate the inflator in explosive atmospheres, or in the presence of flammable liquids, gases, or dust.
- Avoid wet/damp areas: Do not expose the inflator to wet or damp areas.
Need help?
General
To Next Page