EasyManuals Logo

Sakura Tissue-Tek Glas g2 User Manual

Sakura Tissue-Tek Glas g2
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #28 background imageLoading...
Page #28 background image
CUSTOMIZATION OF SETTINGS
3.6 Revised 3/30/2010
4. Press the < and > keys to select a desired option from
1, 2, and 3.
Pattern 1 A short “beep” sound is output six
times repeatedly.
Pattern 2 An intermediate length “beep”
sound is output six times repeatedly.
Pattern 3 A long “beep” sound is output six
times repeatedly.
5. Press the ENTER key to save the selected setting. To
return to the menu screen without saving the change,
press the EXIT key.
Selecting the Alarm Volume/Tone
This sets a desired volume and tone for both the
alarm sound and the end sound. There are four pattern
choices.
NOTE: This menu item is available only when the system
is on standby or paused or when the system check screen
is displayed.
1. Press the MENU key.
2. Press the < and > keys to highlight 8, “ALARM, and
then press the ENTER key.
3. The alarm setting screen appears.
4. Press the < and > keys to select a desired option from
1, 2, 3 and 4 (Figure 3-N).
Figure 3-N
5. Press the ENTER key to save the selected setting. To
return to the menu screen without saving the change,
press the EXIT key (Figure 3-O).
Figure 3-O: Alarm setting Screen
Selecting the Start Method
Select between two start methods using this function.
NOTE: This menu item is available only when the system
is on standby or paused or when the system check screen
is displayed.
1. Press the MENU key.
2. Press the < and > keys to highlight 9, “START
METHOD, and then press the ENTER key.
3. The start method setting screen appears (Figure 3-P).
4. Press the < and > keys to select either “START KEY”
or “UNLOADING STATION ACCESS DOOR.
START KEY” Operation will start when the
START key is pressed.
“UNLOADING STATION ACCESS DOOR”
Operation will start when the unloading station
access door is closed.
5. Press the ENTER key to save the selected setting. To
return to the menu screen without saving the change,
press the EXIT key.
Figure 3-P: Start Method Setting Screen
<START METHOD>
START KEY
[<][>] to select
[ENTER] to save
<ALARM>
1 / 2 / 3 / 4
[<][>] to select
[ENTER] to save
4
Pattern Volume Tone
Small
Large
Low pitch
Low pitch
High pitch
High pitch

Other manuals for Sakura Tissue-Tek Glas g2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sakura Tissue-Tek Glas g2 and is the answer not in the manual?

Sakura Tissue-Tek Glas g2 Specifications

General IconGeneral
BrandSakura
ModelTissue-Tek Glas g2
CategoryLaboratory Equipment
LanguageEnglish

Related product manuals