Need help?Do you have a question about the salav STM-501 and is the answer not in the manual?
General| Model | STM-501 |
|---|---|
| Category | Steam Cleaner |
| Power | 1500W |
| Cord Length | 5 m |
| Heat-up Time | 8 minutes |
| Steam Time | 45 minutes |
| Accessories | Carpet Glider, measuring cup, funnel |
Details model, water tank capacity, steam ready time, input voltage, and output power.
Open the quick clamp and adjust the handle to the desired length.
Close the quick clamp and insert the telescopic pole into the main body.
Secure the mop pad to the bottom of the mop head firmly.
Open the reservoir cover, fill with water (do not overfill), and snap the cover back.
Plug in the steam mop and turn it on by pressing the power button.
Wait 45 seconds for the steam to be ready.
The steam mop is ready; high-temperature steam kills germs and bacteria.
Turn off, unplug, and allow the steam mop to cool down completely (approx. 30 mins).
Press the release button, pull out the handle, and drain the water.
Install the telescopic handle pole to the main body and wrap the power cord.
Remove the mop pad for cleaning.
To Next Page
