To Next PageTo Next Page
Need help?Do you have a question about the Salda RIRS 400HW EKO 3.0 and is the answer not in the manual?
General| Model | RIRS 400HW EKO 3.0 |
|---|---|
| Category | Fan |
| Airflow | 400 m³/h |
| Heat recovery efficiency | up to 90% |
| Heat exchanger type | Counterflow |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Noise Level | 35 dB |
Guidelines for safe transit and storage of the unit.
An introduction to the RIRS 400HE/HW EKO 3.0 ventilation unit.
Crucial safety measures for handling and operating the unit.
Visual diagram and list of the unit's main components.
Specifies the required environmental parameters for unit operation.
Comprehensive specifications, performance metrics, and electrical data.
Information on unit variants and how to change the service access side.
Detailed instructions for reconfiguring the unit's maintenance access.
Overview of optional components that enhance unit functionality.
Details on connecting AVA/AVS modules for integrated system control.
Procedures for the correct physical installation of the unit.
Explanation of the unit's automated control logic and functions.
Guidance on setting up and optimizing the unit's operational parameters.
Instructions for connecting the unit to a BMS via the ModBus protocol.
A reference list of ModBus addresses for device communication.
Schematic representation of the main control board (RG1).
Explains the meaning of various LED status lights on the control board.
Identification and specifications for controller and system components.
Instructions for filter inspection, cleaning, and replacement.
Procedures for inspecting and servicing the unit's fan assembly.
Guide for cleaning and maintaining the heat exchanger rotor.
Steps for servicing the unit's electric heating element.
Specifications for the sizes and types of filters used.
Overview of the unit's built-in safety features.
Measures to prevent freezing of water-based components.
Common operational issues and their recommended solutions.
Guidance for diagnosing and resolving sensor-related errors.
General guidelines and requirements for electrical hookup.
General schematic illustrating the unit's electrical layout.
Specific wiring schematic for the electrical heater configuration.
Specific wiring schematic for the water heater configuration.
Detailed mapping of sensors and terminal connections.
