Need help?Do you have a question about the Salda RIS 1500 PE 3.0 and is the answer not in the manual?
General| Brand | Salda |
|---|---|
| Model | RIS 1500 PE 3.0 |
| Category | Air Handlers |
| Language | English |
Covers critical safety instructions for installation, operation, and maintenance procedures.
Provides an overview of the heat recovering air handling units and their key features.
Details the physical dimensions and weight specifications for different unit models.
Lists detailed technical specifications, including electrical, performance, and material data.
Outlines the permissible operating parameters such as temperature and humidity limits.
Instructions for inspecting the unit upon delivery to check for damages.
Guidelines for safe transportation and storage of the unit to prevent damage.
Steps for safely unpacking the unit and its associated accessories.
Visual representation of the unit's internal components and their interconnections.
General instructions and considerations for mounting the ventilation unit.
Specifies the necessary space and site requirements for unit installation.
Details the procedure for mounting the unit on a ceiling structure.
Instructions for correctly installing the condensate drainage system.
Guidance on connecting the unit to the air duct system.
Procedures and safety rules for connecting the unit to the power supply.
Essential checks and recommendations before initial unit operation.
Crucial safety measures to follow before performing any maintenance tasks.
General guidelines for regular system checks and maintenance procedures.
Procedures for cleaning or replacing air filters.
Instructions for inspecting and maintaining the unit's fans.
Guidelines for cleaning and maintaining the heat exchanger.
Details on the unit's protection systems, including overheat and antifreeze mechanisms.
Information on connecting and operating the unit within a Building Management System (BMS).
Table listing Modbus addresses for various unit functions and parameters.
Comprehensive guide for the electrical wiring and connection of the unit.
Procedures and recommendations for proper system adjustment and calibration.
Diagram and explanation of the control board components and layout.
Explains the meaning of different LED indicators on the controller.
Details labeling and characteristics of control components and system parts.
Provides a schedule for routine system inspections and checks.
Information regarding the warranty terms, conditions, and coupon details.
To Next Page