58 | EN SMARTY v2023.2
14. DECLARATION OF CONFORMITY
Manufacturer
SALDA, UAB
Ragainės g. 100
LT-78109 Šiauliai, Lithuania
Tel.: +370 41 540415
www.salda.lt
Hereby conrms that the following products - Air handling units:
Smarty*
(where by „*“ indicates possible unit installation type and modication)
Provided it was delivered and installed in the facility in accordance with the included installation instructions, comply with all applicable require-
ments in the following directives:
Machinery Directive 2006/42/EC
EMC Directive 2014/30/EU
Low Voltage Directive 2014/35/EU
Ecodesign Directive 2009/125/EC
RoHS 2 Directive 2011/65/EU
The following regulations are applied in applicable parts:
Ecodesign requirements for ventilation units Nr. 1253/2014
Energy labeling of residential units Nr. 1254/2014
The following harmonized standards are applied in applicable parts:
LST EN 13141-7:2011 - Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 7: Performance
testing of a mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for single family
dwellings.
LST EN ISO 12100:2011 - Safety of machinery - General principles for design - Risk assessment and risk reduction.
LST EN 60204-1:2018 - Safety of machinery - Electrical equipment of machines - Part 1: General requirements.
LST EN 60335-1:2012 - Household and similar electrical appliances. Safety. Part 1: General requirements.
LST EN 60529:1999/A2:2014/AC:2019 - Degrees of protection provided by enclosures (IP code).
LST EN 61000-6-1:2007 - Electromagnetic compatibility (EMC) .Part 6-1: Generic standards - Immunity for residential, commercial and light-in-
dustrial environments.
LST EN 61000-6-4:2007/A11:2011 - Electromagnetic compatibility (EMC) .Part 6-4: Generic standards - Emission standard for industrial environ-
ments.
Should any alterations be made in the products, this declaration will no longer apply.
Quality: SALDA UAB activities are in line with the international quality management system standard ISO 9001:2015.
Date 2022-05-17
Giedrius Taujenis
Product Manager
To Next Page
Loading...
Need help?
General
