Need help?Do you have a question about the Salewa Via Ferrata Set and is the answer not in the manual?
General| Brand | Salewa |
|---|---|
| Model | Via Ferrata Set |
| Category | Accessories |
| Language | English |
Lists the main parts of the via ferrata set, such as tie-in loop, absorber, carabiners.
Instructions on how to attach the set to the harness and use carabiners correctly.
Explains the use of the rest loop for securing oneself on the via ferrata.
Guidance for the Ergo Zip model, focusing on lanyards and the rewinding mechanism.
Warns against incorrect attachment of components before the absorber.
Explains what happens after the absorber is triggered and the set's lifespan.
Discusses maximum fall height absorption and potential entrapment risks.
Instructions for rental companies regarding user provision and checks.
Instructions to carefully check all product parts for wear before each use.
Inspect carabiners, fibers, corrosion, and the red safety cord for faults.
Explains correct loading direction for carabiners and avoiding gate pressure.
Check the protective bag and tear webbing absorber for faults or cracks after each use.
Avoid high temperatures, sharp edges, and contact with chemicals like acids.
If there is any doubt about product safety, it must be replaced immediately.
Lifespan depends on usage, UV exposure, moisture, storage, and dirt.
Synthetic fibers age over time due to environmental conditions and UV light.
Recommends replacing safety equipment after a maximum of 10 years from production.
Provides specific maximum lifespan examples based on usage frequency.
Guidelines on proper storage, avoiding heat, extreme temperatures, and chemical contact.
Instructions for washing with lukewarm water and drying at room temperature.
Prohibits modifications, repairs, and tying knots on the product.
Mandates annual inspection of the product by a competent person.
Details on identifying labels including manufacturer, product name, and traceability codes.
Lists relevant standards like EN 958, EN12275, UIAA121, and CE markings.
Information on notified bodies performing EU type examinations and manufacturing control.
Details on UKCA marking and UK approved bodies for type examination.
Specifies carabiner class, breaking loads, and material composition.
To Next Page
