Need help?Do you have a question about the Salford 570 RTS Series and is the answer not in the manual?
General| Brand | Salford |
|---|---|
| Model | 570 RTS Series |
| Category | Farm Equipment |
| Language | English |
Details recommended torque values for various bolt sizes and important usage notes.
Explains DANGER, WARNING, CAUTION, IMPORTANT, and NOTE meanings for safety.
Critical safety measures for hydraulic systems to prevent injury.
Illustrates the location and quantity for each safety decal on the machine.
Step-by-step instructions for installing hinge pins to secure the frame.
Details on correctly mounting fold cylinders, noting port orientation and pinning.
Instructions for pinning cylinder rods after purging air from the hydraulic system.
Diagrams showing axle placement for 24, 27, and 30ft models.
Diagrams showing axle placement for 41ft models.
Diagram labeling components for the self-leveling and depth control system.
Instructions for assembling the self-leveling mast and its pivot connection.
Steps for installing hydraulic cylinders and the depth control rod.
Diagram illustrating the assembly of the tongue and its telescoping components.
Details on attaching the clevis hitch, round mount tube, and jack.
Parts and steps for installing the 8000lb mainframe axle.
Parts and steps for installing the 41ft mainframe axle.
Diagram and part list for 8000lb tandem axle assemblies.
Diagram and part list for 10000lb tandem axle assemblies.
Diagram and parts for wing tandem axle installation.
Diagrams and part list for 5000lb tandem axle assemblies.
Diagram and parts for the 5000lb hub and spindle assembly.
Diagram and parts for the 4000lb hub and spindle assembly.
Diagram and parts for the 8000lb hub and 14" spindle assembly.
Diagram showing RTS coulter mounts and associated parts.
Detailed parts list for RTS coulter, springs, and mounting hardware.
Diagram showing the exploded view of the Coil-Tech C90101 coulter.
Details on V-Seal Kit and Bearing Kit for Coil-Tech coulter.
Instructions for setting up the harrow, including tine placement and roller stops.
Guide on adjusting tine angle and rake for optimal trash flow.
Diagram illustrating the components of the 62-inch harrow arm.
Detailed parts list for the 62-inch harrow arm assembly.
Specifications and parts for 3, 4, 5, and 6-tine harrow assemblies.
Diagram showing coulter spacing for 24ft models.
Diagram showing coulter spacing for 27ft models.
Diagram showing coulter spacing for 30ft models.
Diagram showing coulter spacing for 41ft models.
Diagram showing tine and roller layout for 24ft harrow.
Diagram showing tine and roller layout for 27ft harrow.
Diagram showing tine and roller layout for 30ft harrow.
Diagram showing tine and roller layout for 41ft harrow.
Diagram illustrating hydraulic hose routing for wing folding.
Steps for charging hydraulic cylinders and purging air.
Diagram showing hydraulic hose routing for the lifting system.
Instructions for charging lifting system cylinders and purging air.
Diagrams and parts list for RTS light installation.
Diagram and part list for installing SMV sign and parking stand.
Diagram showing components and installation for the wing fold-lock.
Diagram illustrating hose routing for single and double fold frames.
Table detailing hose lengths for different machine configurations.
To Next Page
