SALICE Progressa - Page 58

28.5
Y1 = Min. 50 Y1 = Min. 50
Y2 = Min. 40
Y2 = Min. 40
RUNNER LENGHT
MIN. INSIDE CABINET DEPTH
Rappresentazione con linee di tangenza
Rappresentazione senza linee di tangenza (semplificata)
Full-extension runner attached to the shelf by clips.
Push: the opening system for handle-less drawers is fully integrated in the runner.
A slight pressure of the drawer front is enough for the drawer to open.
Product features
- 50 kg Dynamic load capacity
- Full extension with a synchronized mechanism
- Available in lengths ranging from 350 mm to 500 mm in 50 mm increments
- Integrated Push opening system
- Safety system that prevents the shelves from turning over
- Tool free height adjustments +2.5 mm
- Tool free depth adjustments +/- 3 mm
- Tool free side adjustments +/- 1.5 mm
- Optional: Push Synchronizer
- The shelf is held in the closed position
- Finish: bright zinc-plated
- 100% Made in Italy
Progressa+ - Concealed undermount Shelf runner - Full-extension
Shelf Push to open
Dimensions
RUNNER LENGTH
MIN. INSIDE CABINET DEPTH
58