Need help?Do you have a question about the Sallmetall SALL LAMINATOR S1400 and is the answer not in the manual?
Step-by-step guide for uncrating, placing, and leveling the laminator.
Details on voltage, frequency, and transformer usage for the laminator.
Explains the purpose of each button and indicator on the control panel.
Explains the electrical brake for tension and wind-up paper regulation.
Describes how to use emergency stop buttons and their immediate effects.
Provides initial settings for pressure, wind-up, and unwind regulators.
Step-by-step guide for creating selfadhesive backgrounds, including width considerations.
Details setting pressure, laying film, and running the lamination process.
Addresses wrinkles, tension, and material defects during lamination.
Guide to checking and adjusting roller parallelism for optimal performance.
Instructions for adjusting the roller pressure indicator and gain.
Instructions for adjusting potentiometers P1 and P2 for the wind-up motor.
Instructions for adjusting the electrical brake for proper tension.
Adjusting motor speed using front panel controls and potentiometers.
Setting the current limiter to protect the motor from thermal trouble.
Adjusting to eliminate revolution differences between free-wheel and full load.
General| Brand | Sallmetall |
|---|---|
| Model | SALL LAMINATOR S1400 |
| Category | Laminator |
| Language | English |
To Next Page