39
d. Power Supply.
Connect USB port and car lighter with the car charger, then start the engine, the device will automatically
switch on and start recording. Connect the device to the available USB port.
Note: there are two mini USB ports; one is on the device, another is on the camera holder.
e. G-Sensor Function
When there is a collision, the Gravity Sensor (G-Sensor) can register the direction and exact data of the
collision. Meanwhile, according to the set value in G-sensor sensitivity, the device determines whether to
switch the video that is recording to the protection mode or note. This will not be overwritten by loop recording.
G-Sensor direction as in the picture below:
To Next Page
Loading...