5 Salt TV Features
5.1 Your First Steps and Login
After the initial setup of your Salt TV Box, you will be automatically logged in. To use your Salt
TV Box, it must be connected to the internet in your home network (see Chapter 4 „Setup“).
Switch on your Salt TV Box using the power button on the provided remote control. After a
brief moment, you will be automatically logged in. If something goes wrong, please ensure
that your TV is turned on and correctly connected to the Salt TV Box via the HDMI cable,
as described in Chapter 4.1 „Initial Setup.“
The operation status of the Salt TV Box is indicated by the LED light. The LED light will be white
when the box is turned on and red in standby mode. The Salt TV Box is in the initial setup
process when the LED light is white and approximately 60 seconds after powering on the
device from deep standby mode. If you‘re switching on from active standby mode, the device
should be up and running after approximately 10 to 15 seconds..
11
To Next Page
Loading...