Salubrion Enso Pearl User Manual

Adjusts the clock time using increment/decrement buttons.

Selects between 12/24-hour format and resets seconds.

Confirms and exits clock setting mode.

Sets the desired alarm time using increment/decrement buttons.

Activates or deactivates the alarm function.

Temporarily silences the alarm for 9 minutes.

Introduces timer modes: Countdown (Interval/Repeat) and Count-up (Stopwatch).

Explains timing sequences of multiple sub-timers (Intervals) up to 50.

Sets the duration for the current interval using increment/decrement.

Proceeds to configure the next interval in the sequence.

Allows adding more intervals and reviewing previous ones.

Begins the countdown for the configured interval timer.

Configures a single timer to repeat up to 99 times.

Cycles through timer configurations and explains Stopwatch function.

Sets the audio alert volume level, with 0 muting the sound.

Selects from different audio alert tones.

Details how selected tones play during timers and alarms.

Activates the backlight for 5 seconds; availability depends on power limits.

Hides numerical display during a timer, showing only the Enso Ring.

Resets specific timers (T1, T2, T3) completely.

Instructs on battery replacement when the low battery icon appears.

Details FCC compliance and radio/television interference guidelines.

Outlines the one-year limited warranty terms and conditions.