Sam4s ER-180T Series - Currency Conversion

42  Operating Instructions SAM4s ER-180T Operator's & Programming Manual v1.4
Currency Conversion
If you normally accept currency from neighboring nations, you can program to convert the
subtotal of a sale to the equivalent cost in the foreign currency. To do this, you need to
program the conversion factor. For example, if the US dollar (home currency) is worth
1.3720 Canadian dollars (foreign currency), the conversion factor is 1.3720. See "Function
Key Programming" in the "Program Mode Programming" chapter to set a conversion factor.
1. Register the items you wish to sell.
2. Press the RCPT ON/OFF-C/CONV key:
RCPT
ON/OFF
C/CONV
3. Enter the amount of the foreign currency
tender, Press CASH:
CASH/TEND
(
=
)
0 0 1 0
4. The display will indicate the amount of
foreign currency tendered and display
$5.19 change due. The change due is
computed in home currency!
THANK-YOU
CALL AGAIN
02/17/2010 MON 09:23
DEPT T1 $2.00
1.00xITEMS
- - - - - - - - - - - - -
TAXABLE 1 $2.00
TAX 1 $0.10
TOTAL $2.10
CONV €10.00
CHANGE RATE @1.3720
HOME AMT $7.29
TOTAL $5.19
KELLY 000085 000000
The currency symbol you
program will display here. See
"Print Option Programming" in
the "Program Mode
Programming" chapter.