56 Program Mode Programming SAM4s ER-180T Operator's & Programming Manual v1.4
Program 520 - Department Price/HALO Programming
Use the following steps to set the high amount lock out or preset price for each department.
1. Turn the key lock to the P position.
2. To begin the program, enter 5 2 0 and press the SUBTOTAL key.
0 SUBTOTAL2 5
3. Select the Department or Departments you wish to program in one of the following
ways:
Press a Department key on the keyboard, or
1
To set a group of departments with the same price/HALO, press the first department
in the series and then press the last department.
16 1
4. If the Department is open, enter a HALO of up to 7 digits. If the Department is
preset, enter a preset price. (The maximum preset price you can enter is $99,999.99)
X/TIME
X
5. To program additional Departments, repeat from step 3, or press the CASH/TEND
key to finalize the program.
CASH/TEND
=