•
••
• 6 Getting Started
Paper and Take-Up Spool Installation
• Remove the printer cover.
(Fig A & B)
• Open the paper arm.
(Fig C)
• Insert the roll as shown.
(Fig D)
• Push down the paper arm until it clicks in place.
(Fig E)
• Press the FEED button to ensure the paper feeds correctly.
Journal Settings
• If using journal printing, remove the left hand end of the Spool and feed the
leading edge of the paper into the slot.
(Fig F)
• Replace the end of the Spool
(Fig g)
• Turn the Spool two to three turns and place into the paper well slot.
(Fig H & I)
• Replace the printer cover.
(Fig J)
• To activate the spool turning, refer to page 10 Receipt or Journal paper usage.
To Next Page
Loading...
