Program Mode •
••
• 45
Program
The following explains the operation of the register, whilst in PGM (program) position
PROGRAM MODE (P)
If an error occurs during operation in this mode press the CLEAR key to stop
the tone and continue with the operation.
Tax Setting
The following allows the pre-programming of four tax numbers with rates
I.e. Tax 1 set as 17.5% and Tax 2 as 0.00%
The sales keys are then linked to these tax numbers allowing the calculation
of various VAT amounts based on the sales values entered.
To Change Settings
• Insert the key stamped C and turn to the PGM position
• Enter 53 and press the SUBTOTAL key
•
On the number keys type in the answer to question
a
This would be value for the first tax rate I.e. 17.500
(with decimal point
) for 17.5%
•
On the number keys type in the answer to question
b
I.e. this would be 2 for VAT inclusive prices or 0 for VAT add on.
•
On the number keys type in the answer to question
c
I.e. this would be the tax number 1 to 4 which is then set to an item
• Press X/TIME then the CASH/TEND key and return to the REG position
Tax Rate Amount
This would be value for the tax rate
i.e. 17.500 for 17.5% (enter decimal point)
b
2
0
Vat Included
Vat added to prices
This sets whether the retail prices include
Tax or if Tax is added to the sale price.
c
1
2
3
4
Tax 1
Tax 2
Tax 3
Tax 4
This sets which Tax number the rate will be
applied to i.e.
Rate 1 set as 17.5%
To Next Page
Loading...
