•
••
• 56 Program Mode
Print Option Programming
The register operation can be tailored using the following options. In order to
change each option the question is entered followed by the answer, both of
these entries are numeric and are shown on the subsequent page.
Programming a Print Option:
•
Move
to the PGM position
• Enter 40 and press the SUBTOTAL key
• Enter a question number 1,2,3 etc and then press the X/TIME key
(Question and answer table shown following)
• Enter the answer and press SUBTOTAL
I.e. Press 5 X/TIME 1 SUBTOTAL to allow a copy receipt to be issued
• Repeat with the next question
• Press the CASH/TEND key and return to the REG position
Question
Answer Explanation
5
*
1
0
Allow a copy receipt to be issued
Do not allow a copy receipt
To Next Page
Loading...
