Sam4s ER-180U Series - Function Keys, Clerk, and Messages

Program Mode •
••
• 59
Function Key Programming
Function keys can be defined with an 8 letter name, which is printed on the
customer receipt with the default retained for reporting. In addition there is a
status which controls the functionality. The following outlines all the settings.
Function key Name – By Alpha Keys
• Move to the PGM position
• Enter the function code shown below and press the SUBTOTAL key
60034 Currency 60035 - 60036 -%
60037 +% 60030 RETURN 60041 NO SALE
60043 R.A. 60044 P.O. 60045 CHEQUE
60046 CHARGE 60048 CASH / TEND 60047 SUBTOTAL
• The display shows 034-00-0 which is Func No–Letter Count–Key Press Count
• Press the number key 1,2,3, or 4 times to select the required letter. I.e.
The key press count E.g. 001-00-1 will increase per letter
• Wait until the letter count has increased E.g. 001-01-0 and select the next letter
Up to 8 letters can be printed. Bold, Caps, and Back can also be selected.
• Press the SUBTOTAL key and repeat for further items if required
• To finish press the CASH/TEND key and return to the REG position
Function key Name – By Alpha Code Entry
• Move to the PGM position
• Enter 80 and press the SUBTOTAL key
• Enter 3 digit letter code (see appendix a) for up to 8 letters, and press Key to set
• Press the CASH/TEND key and return to the REG position
0 0 x x
SUBTOTAL
6
SUBTOTAL
Press up to 8 letters using the alpha keyboard
7
Space
8
ABC
9
DEF
0
Bold
00
Caps
.
Back
4
GHI
5
JKL
6
MNO
1
PQRS
2
TUV
3
WXYZ
3 digit
code
3 digit
code
3 digit
code
Etc up to 8 letters
CASH / TEND
(=)
SUBTOTAL
0
8
Key to
be set
CASH / TEND
(=)