Program Mode •
••
• 63
Receipt Message
It is possible to print a 6 line receipt message at the top and bottom of the
receipt. This is used to show such details as store name, address and
telephone number etc.
Name – By Alpha Keys
• Move to the PGM position
• Enter 3000 for top or 4000 for bottom message then the Line No. 1 to 6
I.e. 40001 SUBTOTAL for Bottom Message Line 1
• Press the SUBTOTAL key
• The display shows
001-00-0
which is
Line No–Letter Count–Key Press Count
• Press the number key 1,2,3, or 4 times to select the required letter.
I.e.
The key press count
E.g. 001-00-1
will increase per letter
• Wait until the letter count has increased
E.g. 001-01-0
and select the next letter.
Up to 24 letters can be printed per line. Bold, Caps, and Back can also be selected
• Press the SUBTOTAL key and repeat for further lines if required
• To finish press the CASH/TEND key and return to the REG position
Name – By Alpha Code Entry
• Move to the PGM position
• Enter 700 for top or for bottom message enter 750 and press the SUBTOTAL key
• Enter the line number and press X/TIME key
• Enter 3 digit letter code
(see appendix a)
up to 24 letters, and press SUBTOTAL key
• For further lines repeat by entering the line number followed by X/TIME, then
entering the set of 3 digit codes and press SUBTOTAL
• To finish, press CASH/TEND and return to the REG position
0 0 0
Line
No.
SUBTOTAL
3 – top
4 - bottom
To Next Page
Loading...
