Sam4s ER-230 Series - Page 103

Sam4S ER230 Series Electronic Cash Register AU Program Mode Programming • 99
Address PRINT OPTION VALUE = SUM
Issue a second receipt for the same transaction?
(Buffer receipt issue when receipt printer is on)
(Also see Sys Opt #6)
Yes = 1
No = 0
Priority print by group on the kitchen printer?
Yes = 2
No = 0
23
Print PLU number on the receipt?
Yes = 4
No = 0
Not print when polling reports?
(Note: this setting is equivalent to ‘print when polling
reports – Yes’
Yes = 1
No = 0
Print PLU number on PLU report?
Yes = 2
No = 0
Net sale = 4
24
Grand total is:
Gross sale =
0
26
NOT USED
25
Send order to the kitchen printer when the SBTL key is
pressed?
Yes = 1
No = 0
26
Print preamble graphic logo on receipt?
Yes = 1
No = 0
Default =
0
27
Print preamble graphic logo
User = 1
28
Number of Pre-feeding lines (0-5) on receipt
0
29
Number of Post-feeding lines (0-5) on receipt
0
ÚDefault values have been highlighted in bold print
NOTE 1: Print Option# 8 - Users outside of the USA can designate a different currency symbol. To select a
different symbol, type descriptors on the alpha keyboard overlay or enter three digit alpha character codes. To
use three digit alpha character codes you must select ‘No’ in system option #30 (See “System Option
Programming”). Also see Descriptor Programming Methods for Alpha Overlay and/or Descriptor Code
Table.
NOTE 2: Print Option# 14,15,16,17 - If you are using the currency conversion feature, you can select the
appropriate symbol for each foreign currency you are accepting. To select a different symbol, type descriptors
on the alpha keyboard overlay or enter three digit alpha character codes. To use three digit alpha character
codes you must select ‘No’ in system option #30 (See “System Option Programming). Also see Descriptor
Programming Methods for Alpha Overlay and/or Descriptor Code Table.