Sam4s ER-230 Series - NS (Non Add#;No Sale)

Sam4S ER230 Series Electronic Cash Register AU Program Mode Programming • 117
#/NS (Non Add#/No Sale)
Options - Program 70
#/NS CASH
Repeat for another
function key
N1 SBTL 0 7 N2 N3 N4
Address OPTION VALUE = SUM
No Sale is inactive?
Yes = 1
No = 0
No Sale active in X control lock position only?
Yes = 2
No = 0
N1
No Sale inactive after non-add # entry?
Yes = 4
No = 0
Enforce non-add # entry at start of sale?
Yes = 1
No = 0
Print when a NO SALE is performed?
Yes = 0
No = 2
N2
Non-add # entries are prohibited?
Yes = 4
No = 0
Compulsory non-add entry must match number of digits
set in the MAX DIGIT flag below?
Yes = 1
No = 0
N3
Print non-add on guest check?
Yes = 2
No = 0
N4
Enter maximum number of digits for non-add number
entry. (0-8; Zero (0) means no limit).
0
ÚDefault values have been highlighted in bold print
Descriptor - Programs 80 & 81
Since two distinct functions, # entry and no sale, reside on the same key, different programs are used
to program each descriptor.
To program the ‘no sale’ descriptor:
FUNCTION
KEY
CASH
Repeat for another
function key
SBTL 0 8 Enter up to 18 descriptor codes
To program the ‘#(non add)’ descriptor:
FUNCTION
KEY
CASH
Repeat for another
function key
SBTL 1 8 Enter up to 18 descriptor codes