Sam4s ER-230 Series - Program 1400 - Scale Tare Weight Programming

Sam4S ER230 Series Electronic Cash Register AU Program Mode Programming • 149
Program 1400 - Scale Tare Weight Programming
A tare is the amount of weight representing the container, or package when items are sold by weight. You can
pre-program five tare weights, representing the weight of different containers. When you place an item and a
container on optional scale, you can enter the tare number to automatically subtract the pre-programmed tare
weight. If you choose to use tare #5 for manual tare weight entry, do not enter a weight for tare #5. (See
TARE.)
Programming the Scale Tare Weight
1. Switch to P Mode by press MODE function key.
2. To begin the program, enter 1 4 0 0, press the SBTL key.
0 SBTL 0 4 1
3. Enter the number (1-5) of the tare you wish to program; press the X/TIME key.
X/TIME
4. Enter the weight of the tare (one digit preceding the decimal key, the decimal key,
then three digits after the decimal key). Press the SBTL key.
SBTL
.
5. To program additional tare weights, repeat from step 3, or press the CASH key to
finalize the program.
CASH