Sam4s ER-230 Series - Cash Management; Cash Declaration Programming

Sam4S ER230 Series Electronic Cash Register AU Service Mode Programming • 67
Function Key Assignment Programming
Function keys may be relocated, inactivated or changed with this program. For example, you may
wish to place functions, such as PREVIOUS BALANCE and SERVICE that are not placed on the
default keyboard. Or perhaps, you may wish to remove a function, such as CANCEL, for security
reasons.
Program 70 - Function Key Assignment Programming
Please note the following limitations:
• If you assign a duplicate of a function code, the duplicate will function exactly as the
original - you will not get separate totals and counters on reports for the duplicated key.
• You can reassign keys only in locations that are programmable. See "Keyboards“, where the
key locations that may be programmed are identified.
To Assign a Function Key to a Location:
1. Switch to S Mode by press MODE function key.
2. Enter 70, and then press the SBTL key.
0 7 SBTL
3. Refer to Function Key Codes to find the code for the key you wish to assign, press the
location you wish to program. Repeat this step to assign another key.
Key Code
Key
Location
4. Press CASH key to finalize key assignment program.
CASH