Sam4s ER-230 Series - Tax Configuration

82 • Contents Sam4S ER230 Series Electronic Cash Register AU
Program 150 - PLU Group Assignment
Each PLU may report to any three levels of 20 groups. Group totals appear on reports, so that you can
track sales of different types of items. A group can also be used to designate items that are to print on
an optional kitchen printer.
Note: The PLU will report to group "0", if not programmed to report to groups 1-20.
1. Switch to P Mode by press MODE function key.
2. To begin the program, enter 1 5 0, press the SBTL key.
0 SBTL 5 1
3. Select the PLU or PLUs you wish to program in one of the following ways:
• Press a PLU key on the keyboard, or
PLU
• Press the first PLU keys that are to receive the same status and Press the last PLU
keys, or
PLU PLU
• Enter up to 15 digit number of the PLU and press the PLU key, or
PLU
Enter the PLU#,
u
p
to 15 di
g
its
• Enter the number of the first PLU in a range of PLUs that are to receive the same
setting; press the PLU key. Enter the last number in the range; press the PLU key.
PLU
Enter the PLU#,
u
p
to 15 di
g
its
Enter the PLU#,
u
p
to 15 di
g
its
PLU
4. Enter up to three 2-digit numbers representing the groups where you wish to add the
PLUs sales, i.e. enter 1 0 for group 10 or enter 0 4 for group four. If a PLU is link to
group 03 as 1
st
group only, please enter 010000. Then press the X/TIME key.
2
nd
Group1
st
Group 3
rd
Group
X/TIME
5. To program additional PLUs, repeat from step 3, or press the CASH key to finalize the
program.
CASH