Sam4s ER-230 Series - PLU Configuration

84 • Contents Sam4S ER230 Series Electronic Cash Register AU
Program 250 - PLU Stock Amount Programming
With this program, you can add stock to the PLU sales counters for PLUs you have designated as
stock keeping PLUs. See “Program 100 - PLU Status Programming”. The stock number set here
can be the amount of stock that is being added to the current level, or optionally, it can be the new total
stock level. See option #18 in "Error! Not a valid bookmark self-reference." to set this option.
1. Switch to P Mode by press MODE function key.
2. To begin the program, enter 2 5 0, press the SBTL key.
0 SBTL 5 2
3. Select the PLU or PLUs you wish to program in one of the following ways:
• Press a PLU key on the keyboard, or
PLU
• Press the first PLU keys that are to receive the same status and Press the last PLU
keys, or
PLU PLU
• Enter up to 15 digit number of the PLU and press the PLU key, or
PLU
Enter the PLU#,
u
p
to 15 di
g
its
• Enter the number of the first PLU in a range of PLUs that are to receive the same
setting; press the PLU key. Enter the last number in the range; press the PLU key.
PLU
Enter the PLU#,
u
p
to 15 di
g
its
Enter the PLU#,
u
p
to 15 di
g
its
PLU
4. Enter the stock amount you wish to add (up to six digits), press the X/TIME key.
X/TIME
Stock Amount
5. To program additional PLUs, repeat from step 3, or press the CASH key to finalize the
program.
CASH