Sam4s ER-230 Series - NLU and Drawer Limit Configuration

134 • Program Mode Programming Sam4S ER230 Series Electronic Cash Register AU
Program 600 - Trip Level Programming
1. Switch to P Mode by press MODE function key.
2. To begin the program, enter 6 0 0, press the SBTL key.
0 SBTL 0 6
3. Enter the number of the M&M table you wish to program; press the X/TIME key.
X/T IME
4. Enter a level of up to 5 digits (The Maximum Level you can enter is 30000) press the SBTL
key.
SBTL
Enter the level up
to 5 digits
5. Repeat from step 3 for each table you wish to program. Press the CASH key to finalize the
program.
CASH
Program 601 - Price Programming
1. Switch to P Mode by press MODE function key.
2. To begin the program, enter 6 0 1, press the SBTL key.
1 SBTL 0 6
3. Enter the number of the M&M table you wish to program; press the X/TIME key.
X/T IME
4. Enter a price (up to 7 digits); press the SBTL key.
SBTL
Price/HALO
5. Repeat from step 3 for each table you wish to program. Press the CASH key to finalize the
program.
CASH