Sam4s ER-230 Series - Cash-In-Drawer Limit Programming

Sam4S ER230 Series Electronic Cash Register AU Program Mode Programming • 135
Program 610 - Mix & Match Description Programming
Program descriptions by typing description on the alpha keyboard overlay or by entering three digit
alpha character codes. To use three digit alpha character codes you must select ‘No’ in system
option #25 (See “System Option Programming”). Also see Descriptor Programming Methods
for Alpha Overlay and/or Descriptor Code Table.
1. Switch to P Mode by press MODE function key.
2. To begin the program, enter 6 1 0, press the SBTL key.
0 SBTL 1 6
3. Enter the number of the M&M table you wish to program; press the X/TIME key.
X/TIME
4. If you are programming using alpha overlay,
Type up to 12
descriptor keys
SBTL
or,
SBTL
Enter up to 12
three-character codes
5. Press the CASH key to finalize the program.
CASH