Sam4s ER-230 Series - Cash Management; Cash Declaration Programming

Sam4S ER230 Series Electronic Cash Register AU X/Z Mode • 61
Cash Declaration
If compulsory cash declaration is required, you must declare the count of the cash drawer prior to
taking X or Z financial and clerk reports.
You can enter the cash drawer total in one step, or to facilitate the counting of the cash drawer, you
can enter each type of bill/coin and checks separately and let the register act as an adding machine.
You can also use the X/TIME key to multiply the denomination of currency times your count.
Either way you choose to enter cash, the register will compare your declaration with the expected
cash and check in drawer totals and print the over or short amounts on the report.
Program 90 - Cash Declaration Programming
For example:
1. Switch to the X-Mode or Z-Mode
(depending upon the type of report you
are taking.) by press MODE function
key.
2. Press the SBTL key.
0 SBTL9
3. Enter the total of cash.
8 7 6 CASH 9
4. Enter the total of checks.
0 0 0 CHECK2
5. Press the CASH key to total the
declaration.
CASH
Receipt Example:
DATE 15/01/2003 WED TIME 08:33
*** CASH DECLARATION ***
C A S H $98.76
C H E C K $20.00
INPUT AMT $118.76
DRAWER TTL $118.76
DIFFERENCE $0.00
CLERK 1 No.000001 00000