Sam4s ER-230 Series - Memory Allocation Programming

Sam4S ER230 Series Electronic Cash Register AU Service Mode Programming • 65
Memory Allocation
NB. This will clear the Memory!
Program 60 - Memory Allocation Programming
1. Switch to S Mode by press MODE function key.
2. To Allocate Memory, enter 6 0, and then press the SBTL key.
0 SBTL 6
3. Refer to the chart below. Enter the index number and press the X/TIME key.
X X/TIME
X MEMORY ITEM
1
PLU
2
CLERK
3
GROUP
4
Reserved
5
Reserved
6
Reserved
7
PRICE LEVEL
8
MIX AND MATCH
9
ELECTRONIC JOURNAL LINE # (EJ LINE #)
4. Enter the Number to allocate for the Memory Item and Press CASH key.
See the example data table below
N CASH
MEMORY ITEM N
PLU
50 (Max.5000)
CLERK
5 (Max. 99)
GROUP
20 (EPROM v1.003) 5
(Max. 99)
Reserved
Reserved
Reserved
PRICE LEVEL
1 (Max. 2)
MIX AND MATCH
20 (Max. 99)
EJ LINE #
3000 (EPROM v1.003) 300
(Max. 12000)
ÚDefault values have been highlighted in bold print
5. If you want to finish memory allocation, Enter CASH key with no numeric key input. If
you want to allocate another memory area, repeat step 3 and 4.
CASH