Sam4S 230, 3xx, 4xx, 52xx Electronic Cash Register AU Service Mode Programming • 129
Load Receipt Images
You can load a preamble (ER-230, ER-3xx, ER-4xx and ER-52xx/M) and postamble (ER-4xx and
ER-52xx/M) images for receipt. Before loading, the images must be converted by the PC Utility to
.img format. After conversion, they can be loaded directly by connecting a PC to the cash register via
PC Utility described here.
NOTE: After loading the images, you need to revise Print Options #21, #22 and #30 (#21 and #27 on
ER-230) to activate the customise image printing.
Preparing a Graphic Logo Bitmap
The image must be black/white (monochrome); 384 x 192 pixels for 57mm wide paper, 288 x 192
for 44mm wide paper, and 10 Kbytes or less in size.
1. Open MS Paint.
2. Open the image file you wish to use.
3. Choose Attributes from the Image menu. The Attributes dialog box displays.
4. The image dimensions must be no larger than 384 pixels wide by 192 pixels high (for
57mm wide paper) or 288 pixels wide by 192 pixels high (for 44mm wide paper). If the
image size in pixels is greater than the maximum, you must resize your image.
a. Click OK to exit the Attributes dialog.
b. Select your image. (Choose Select All from the Edit menu.)
c. Using the handles of the selected image, resize the image. Keep the image in the
upper left corner of the screen.
d. Choose Attributes from the Image menu. The Attributes dialog box displays again.
Enter 384/288 in the Width field; enter 192 in the Height field; select Pixels as the
unit. Click OK to exit the dialog box.
e. Your image will be cropped to the 384 x 192 pixel or 288 x 192 pixel size. If you
cropped part of the image you wish to keep, you can undo (Ctrl + Z) and try again.
You may have to experiment a bit to resize the image inside the 384 x 192 pixel or
288 x 192 pixel limit.
5. After the image is sized, select Black and white in the Attributes dialog.
To Next Page
Loading...
