Sam4s ER-390M - Program 600 - Trip Level Programming; Program 601 - Price Programming

Sam4S 230, 3xx, 4xx, 52xx Electronic Cash Register AU Program Mode Programming • 215
Program 600 - Trip Level Programming
Programming the Number of Item Purchased
1. Turn the control lock to the PGM-Mode.
Switch to P Mode by press MODE function key. (For ER-230)
2. To begin the program, enter 6 0 0, press the SUBTL key.
3. Enter the number of the M&M table you wish to program; press the X/TIME key.
4. Enter a level of up to 3 digits (The Maximum Level you can enter is 200) press the
SUBTL key.
5. To program additional Mix & Match Discount Trip Level, repeat from step 3, or press
the CASH key to finalise the program.
Program 601 - Price Programming
Programming the Discount Dollar Amount
1. Turn the control lock to the PGM-Mode.
Switch to P Mode by press MODE function key. (For ER-230)
2. To begin the program, enter 6 0 1, press the SUBTL key.
3. Enter the number of the M&M table you wish to program; press the X/TIME key.
4. Enter a Discount Dollar Amount (up to 4 digits, Do Not Use Decimal Point); press the
SUBTL key.
5. To program additional Mix & Match Discount Price, repeat from step 3, or press the
CASH key to finalise the program.
CASH
SBTL
Discount Dollar Amount
X/TIME
1 SUBTL0 6
CASH
0 SUBTL0 6
X/TIME
SBTL
Enter the level up
to 5 digits