Sam4s ER-420 Series - Memory Allocation

68 • Service Mode Programming ER420 Series
Memory Allocation
1. Turn the control lock to the S position.
2. To Allocate Memory, enter 60, press the SBTL key.
0 SBTL6
3. Refer to the chart below. Enter the index number and press the X/TIME key.
X X/TIME
X MEMORY ITEM
1
PLU
2
CLERK
3
GROUP
4
CHECK#
5
SOFT CHECK LINE
6
CHECK TYPE : Hard(1), Soft(0)
7
PRICE LEVEL
8
MIX AND MATCH
4. Enter the Number to allocate for the Memory Item and Press CASH key.
See the example data table below
N CASH
MEMORY ITEM N
PLU
1000 (Max.9000)
CLERK
15 (Max. 99)
GROUP
20 (Max. 99)
CHECK #
20 (Max. 500)
SOFT CHECK LINE
50 (Max. 100)
CHECK TYPE
0(Soft Check), 1(Hard Check)
PRICE LEVEL
1 (Max. 2)
MIX AND MATCH
20 (Max. 99)
Default Memory Allocation
5. If you want to finish memory allocation, Enter CASH key with no numeric key
input.And If you want to allocate Another memory area, Repeat 3,4 STEP.
CASH