Sam4s ER-420M - Tare

206 • Program Mode Programming Sam4S 230, 3xx, 4xx, 52xx Electronic Cash Register AU
TABLE (Table #, for Soft/Hard Check - Bill or Account)
(Exclude ER-230)
Options - Program 70 (PGM-Mode)
Address OPTION VALUE = SUM
N1
Table number entry compulsory before opening a
new check?
Yes = 1
No = 0
Table number entry compulsory for all sales?
Yes = 2
No = 0
Print table# at the remote printer?
Yes = 4
No = 0
ÚDefault values have been highlighted in bold print
Descriptor - Program 80 (PGM-Mode)
- Refer to “Program 80 - Function Key Descriptor”
TARE
Options - Program 70 (PGM-Mode)
Address OPTION VALUE = SUM
Key is inactive?
Yes = 1
No = 0
ER-3xx
ER-4xx
ER-52xx
Key is active in X control lock position
only?
Yes = 2
No = 0
ER-230
Reserved
Using tare number five to manually enter a tare
weight?
Yes = 4
No = 0
ÚDefault values have been highlighted in bold print
Descriptor - Program 80 (PGM-Mode)
- Refer to “Program 80 - Function Key Descriptor”
TARE CASH
Repeat for another function key
N1 SUBTL 0 7
TABLE# CASH
Repeat for another function key
N1 SUBTL 0 7