Sam4s ER-430 SERIES - Character Specification; Paper Specification

2 Product Specifications
2-4 SAM4S ER-430 SERIES
2-3-2 Character Specification
Item Description Remark
Character Structure
• 12(W) × 24(H) Dots (Including a Horizontal)
Character Size
• 1.25 mm(W) ×3.0 mm(H)
Column Pitch
• 1.5 mm
Line Pitch
• 3.75 mm (Including 6-dot Line Spacing)
Programable
Number of Column
• 24+24 (12×24 Font)
Table2-3 Character Specification
2-3-3 Paper Specification
The following paper should be used for good print quality and stable paper feeding.
Item Description Remark
Paper Type(standard)
• Han-sol “x” Paper: HPK-110
• Single-ply Thermal Paper Roll
Han-sol Patec CO.,LTD.
Width
• 44.5
±0.5
Maximum Outside Diameter
• Max ø
70.0
In
• ø12.0
±1.0
Paper Roll Spec
Roll Core
(Diameter)
out
• ø18.0
±1.0
Paper Thickness
• 67
±4㎛
Table2-4 Paper Specification
Note: The Following paper can be used instead of the specified paper above.
TF50 KS-E : Nippon Paper industries Co.Ltd.
PD 160R : NEW Oji Paper Mfg, Co.Ltd
F380 : Kansaki Specialty Papers, Inc.(USA)