212 • Program Mode Programming Sam4S 230, 3xx, 4xx, 52xx Electronic Cash Register AU
Address OPTION VALUE = SUM
N6
Allow % key preset override active in X control lock
position only?
Yes = 1
No = 0
Validation is compulsory?
Yes = 2
No = 0
ÚDefault values have been highlighted in bold print
Descriptor - Program 80 (PGM-Mode)
- Refer to “Program 80 - Function Key Descriptor”
Preset % Rate - Program 90 (PGM-Mode)
NOTE: If key is amount, enter 5 digit HALO, or 0 for no HALO. If key is percentage enter
the percentage in a five-digit format, without the decimal (XX.XXX). For
example: for 10%, enter 10000; for 5.55%, enter 05550; for 99.999%, enter
99999.
% CASH
Repeat for another function key
SUBTL 0 9
Enter 5 digit rate or
amount (see note below)
To Next Page
Loading...
